How to Paint an Interior Door

By
Lee Wallender
Lee Wallender
Lee Wallender

Lee has over two decades of hands-on experience remodeling, fixing, and improving homes, and has been providing home improvement advice for over 13 years.

Learn more about The Spruce's Editorial Process
Updated on 07/17/23
Reviewed by
Deane Biermeier
Deane Biermeier
Reviewed by Deane Biermeier
Deane Biermeier is an expert contractor with nearly 30 years of experience in all types of home repair, maintenance, and remodeling. He is a certified lead carpenter and also holds a certification from the EPA. Deane is a member of The Spruce's Home Improvement Review Board.
Learn more about The Spruce's Review Board
Closeup of someone painting an interior door

The Spruce / Sanja Kostic

Project Overview
  • Working Time: 2 - 3 hrs
  • Total Time: 1 - 2 days
  • Skill Level: Beginner
  • Estimated Cost: $40 to $75

Painting an interior door not only freshens up the door, but it also gives the room and the home an entirely new look. This project can be staged out at your convenience—one door at a time or several in a row.

Type of Paint to Use

Use interior acrylic-latex paint. Choose eggshell, satin, or semi-gloss sheens. Avoid using flat or matte paint on doors.

Each door is 68 square feet, including front, back, and edges. One gallon of paint covers about 350 square feet. So, you'll need about one gallon of paint for every five doors.

Most paintable interior doors today come pre-primed. If the door is bare wood, it's likely meant to be stained and coated. Clear pine doors and unfinished wood veneer doors should be stained and clear-coated, not painted. If you do decide to paint these doors, they should first be primed with two coats of interior primer.

The 7 Best Paints for Interior Doors of 2023

Paint Door in Place or Remove It?

You can either remove the interior door from its hinges and paint it laid flat or you can paint it without removing it. In general, it's preferable to remove the door from the hinges.

Paint Door After Removing It

Removing the door gives you access to all parts of the door, including the bottom edge and the back (or hinge) edge. Painting flat also reduces paint drips. Plus, it gives you a chance to move the door off-site to a workshop or a separate room so the project doesn't block any rooms.

Painting Door Without Removing It

Painting a door on its hinges eliminates having to uninstall and later re-install the door. Also, a door on its hinges has both sides of the door available for painting at the same time. When painting a door off-hinges, you need to wait until the top side fully dries before you can turn it over.

When to Paint an Interior Door

As part of a larger remodel, it's best to paint interior doors as one of the last steps in the project. Leaving doors off the hinges for as long as possible eliminates obstacles to installing flooring, door casing, and trim. It also means that wall, ceiling, or trim paint won't end up on your newly painted door.

What You'll Need

Equipment / Tools

  • Cordless drill or manual screwdriver
  • Drop cloth
  • Utility knife
  • Sanding sponge
  • 4-inch foam roller set
  • Paint brush
  • Paint tray and liner
  • Tack cloth
  • Shop vacuum
  • Hammer
  • Nail

Materials

  • Interior acrylic-latex paint
  • Primer (optional)

Instructions

Materials needed to paint an interior door

The Spruce / Sanja Kostic

Paint Door by Removing It

  1. Remove Door

    Tap out the pins in the door hinges. Place the sharp end of the nail at the bottom of the pin. Tap until enough of the pin protrudes for you to pull it out by hand. With the pins out, slide the door off. Leave the other half of the hinges on the door casing.

    Preparing to remove the door from its hinges for painting

    The Spruce / Sanja Kostic

  2. Remove Hinges and All Items From Door

    Place the door on two sawhorses. Remove the hinges from the door. Also remove the doorknob, rectangular faceplate, rose cover (the round trim), and any door hooks or wall protectors.

    Removing hinges from an interior door

    The Spruce / Sanja Kostic

  3. Sand Door

    Lightly sand the door with the sanding sponge. Sand the front and back, as well as the two long edges and the top and bottom edges.

    Tip

    For pre-primed doors, go easy with the sanding to avoid scuffing off the primer.

    Sanding the door before painting

    The Spruce / Sanja Kostic

  4. Clean Door

    Use the shop vacuum and tack cloth to clean off the door.

    Cleaning the door with a shop vac after sanding

    The Spruce / Sanja Kostic

  5. Paint Edges and Panels

    With the brush, paint the edges of the door. If the door has panels, paint them, too. Load up the brush with a minimal amount of paint to avoid runs and sags. Watch for drips along the edges.

    Tip

    Avoid painting the hinge mortises (the indents on the door edge for the hinges). Adding paint can affect the door swing.

    Painting the edges of a door

    The Spruce / Sanja Kostic

  6. Paint With Foam Roller

    While the paint is still wet, switch to the foam roller. Roll paint on all of the flat surfaces. Along the way, touch up any drips from the brushwork.

    Painting the door with a foam roller

    The Spruce / Sanja Kostic

  7. Apply Second Coat

    Wait about two hours for the paint to fully dry. Apply a second coat.

    Applying a second coat to the door

    The Spruce / Sanja Kostic

  8. Paint Other Side of Door

    Wait at least two hours before turning the door over to paint the other side. Because pressure on the paint can cause indents, it's usually safest to wait a full day before turning it.

    Painting the reverse side of the door

    The Spruce / Sanja Kostic

  9. Replace Door and Hardware

    Replace the hinges and all hardware. Slide the door back onto the hinges on the door frame. Replace the hinge pins.

    Replacing the hardware on the door

    The Spruce / Sanja Kostic

Paint Door Without Removing It

  1. Remove All Items From Door

    With the screwdriver, remove the doorknob, faceplate, rose cover (the round trim), hooks, and all items, other than the hinges, that will not be painted.

    Removing hardware from the door

    The Spruce / Sanja Kostic

  2. Add Drop Cloth

    Open the door so that it is about halfway open. Slide the drop cloth under the bottom edge of the door. Make sure that the cloth extends the entire width of the door and outward a few feet.

    Laying a dropcloth beneath the door

    The Spruce / Sanja Kostic

  3. Steady the Door

    Jam a soft item like a towel under the bottom edge of the door. Test the door's steadiness by pressing against it. It should not move.

    Jamming a towel beneath the door frame

    The Spruce / Sanja Kostic

  4. Apply Painter's Tape

    Tape over hinges. Lay full strips of tape across the hinges. Then pare away tape with the utility knife so that only the hinges are covered.

    Applying painter's tape to the door

    The Spruce / Sanja Kostic

  5. Paint Door

    Now, paint the door as you would if you had removed the door. Some differences:

    • The bottom edge of the door will not be painted.
    • Be careful when painting near the taped-over hinges to avoid mounding up too much paint.
    • Paint is prone to dripping on vertical surfaces, so frequently touch up drips as they develop.
    • Both sides can be painted at the same time.
    Using a roller to the paint the door

    The Spruce / Sanja Kostic

When to Call a Professional

While painting a few doors is usually manageable, painting all doors in a house can be tedious and time-consuming. If you're short on time, professional painters can speed up the job, often completing jobs like this in a day or two.